|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] |
|
5/8" CARBIDE LONG LENGTH END MILL 2.250 FLUTE LENGTH
5/8 Dia. 2.250 Flute Length 5/8 Shank 5.0 OAL Uncoated
|
1/2" Drill Mill 4 Flute 90 Deg.
Uncoated Drill Mill
|
|
|
3/4" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
3/4 Dia. 1.0 Flute Length 3/4 Shank 3.0 OAL Tialn Coated
|
3/4" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
3/4 Dia. 1.0 Flute Length 3/4 Shank 3.0 OAL Tialn Coated
|
|
|
3/4" CARBIDE STUB END MILL UNCOATED 2 FLUTE
3/4 Dia. 1.0 Flute Length 3/4 Shank 3.0 OAL Uncoated
|
3/4" CARBIDE STUB END MILL UNCOATED 4 FLUTE
3/4 Dia. 1.0 Flute Length 3/4 Shank 3.0 OAL Uncoated
|
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1/2" Drill Mill 2 Flute 120 Deg.
Uncoated Drill Mill
|
|
|
3/4" CARBIDE LONG LENGTH END MILL 2.250 FLUTE LENGTH
3/4 Dia. 2.250 Flute Length 3/4 Shank 5.0 OAL Uncoated
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
|
1/2" Drill Mill 4 Flute 120 Deg.
Uncoated Drill Mill
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
|
1.0" CARBIDE LONG LENGTH END MILL 2.250 FLUTE LENGTH
1.0 Dia. 2.250 Flute Length 1.0 Shank 5.0 OAL Uncoated
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
|
Size #1 x .0469 point dia. x 1/8 body x .0469 point length
|
1/2" Drill Mill 2 Flute 60 Deg.
Uncoated Drill Mill
|
|
|
Size #2 x .0781 point dia. x 3/16 body x .0781 point length
|
1/2" Drill Mill 4 Flute 60 Deg.
Uncoated Drill Mill
|
|
|
Size #3 x .1094 point dia. x 1/4 body x .1094 point length
|
Size #4 x .125 point dia. x 5/16 body x .125 point length
|
|
|
Size #4-1/2 x .1406 point dia. x 3/8 body x .1406 point length
|
Size #5 x .1875 point dia. x 7/16 body x .1875 point length
|
|
|
Size #6 x .2188 point dia. x 1/2 body x .2188 point length
|
Size #7 x .250 point dia. x 5/8 body x .250 point length
|
|
|
Size #8 x .3125 point dia. x 3/4 body x .3125 point length
|
|
 |
|
| E-commerce powered by MonsterCommerce shopping cart. |