|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] |
|
1/4" Drill Mill 2 Flute 60 Deg.
Uncoated Drill Mill
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
1/8" Drill Mill 2 Flute 60 Deg.
Uncoated Drill Mill
|
1-11 1/2 Carbide Thread Mill NPT
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
1-11 1/2 Carbide Thread Mill NPTF
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
3/16" Drill Mill 2 Flute 60 Deg.
Uncoated Drill Mill
|
|
3/4" Drill Mill 2 Flute 60 Deg.
Uncoated Drill Mill
|
3/8" Dia. 7/8 Flute Length Fine Pitch 3/8 Shank 2.5 OAL TiaLN Extreme Coated.
|
|
3/8" Drill Mill 2 Flute 60 Deg.
Uncoated Drill Mill
|
Uncoated Spot Drill
|
|
5/16" CARBIDE BALL END MILL 2 FLUTE
5/16 Dia. Ball 7/8 Flute Length 5/16 Shank 2.5 OAL Uncoated 2 Flute
|
5/16" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
5/16 Dia. Ball 7/8 Flute Length 5/16 Shank 2.5 OAL Tialn Coated 2 Flute
|
|
5/16" CARBIDE BALL END MILL 4 FLUTE
5/16 Dia. Ball 7/8 Flute Length 5/16 Shank 2.5 OAL Uncoated 2 Flute
|
5/16" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
5/16 Dia. Ball 7/8 Flute Length 5/16 Shank 2.5 OAL Tialn Coated 4 Flute
|
|
5/16" Drill Mill 2 Flute 60 Deg.
Uncoated Drill Mill
|
6 flute high performance profiling TiALN extreme coated end mill.
|
|
5/8" Drill Mill 2 Flute 60 Deg.
Uncoated Drill Mill
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
1/2 Stub Variable Flute End Mill for Steel with Weldon Flat
Our Variable HelixTool Series.TiALN coated.
|
1/2" EXTENDED LENGTH Variable Flute End Mill for Aluminum ZrN
variable helix multi index 3 flute endmill for maximum material removal in aluminum.
|
|
1/4" DOUBLE-END STANDARD END MILL TIALN COATED 2 FLUTE
|
1/4" DOUBLE-END STANDARD END MILL TIALN COATED 4 FLUTE
|
|
1/4" DOUBLE-END STANDARD END MILL UNCOATED 2 FLUTE
|
1/4" DOUBLE-END STANDARD END MILL UNCOATED 4 FLUTE
|
|
1/4" DOUBLE-END STUB END MILL TIALN COATED 2 FLUTE
|
1/4" DOUBLE-END STUB END MILL TIALN COATED 4 FLUTE
|
|
1/4" DOUBLE-END STUB END MILL UNCOATED 2 FLUTE
|
1/4" DOUBLE-END STUB END MILL UNCOATED 4 FLUTE
|
|
1/4" Drill Mill 4 Flute 60 Deg.
Uncoated Drill Mill
|
1/8" Drill Mill 4 Flute 60 Deg.
Uncoated Drill Mill
|
|
2.5" thru 6.0" - 8 Pitch Carbide Thread Mill NPT
This tool cuts an 8 pitch for any standard diameter callout between 2.5" thru 6.0"
|
2.5" thru 6.0" - 8 Pitch Carbide Thread Mill NPTF
This tool cuts an 8 pitch for any standard diameter callout between 2.5" thru 6.0"
|
|
3/16" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
3/16 Dia. 3/8 Flute Length 3/16 Shank 2.0 OAL Tialn Coated
|
3/16" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
3/16 Dia. 3/8 Flute Length 3/16 Shank 2.0 OAL Tialn Coated
|
|
3/16" CARBIDE STUB END MILL UNCOATED 2 FLUTE
3/16 Dia. 3/8 Flute Length 3/16 Shank 2.0 OAL Uncoated
|
3/16" CARBIDE STUB END MILL UNCOATED 4 FLUTE
3/16 Dia. 3/8 Flute Length 3/16 Shank 2.0 OAL Uncoated
|
|
3/16" Drill Mill 4 Flute 60 Deg.
Uncoated Drill Mill
|
3/4" Drill Mill 4 Flute 60 Deg.
Uncoated Drill Mill
|
|
3/8" CARBIDE BALL END MILL 2 FLUTE
3/8 Dia. Ball 7/8 Flute Length 3/8 Shank 2.5 OAL Uncoated 2 Flute
|
3/8" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
3/8 Dia. Ball 7/8 Flute Length 3/8 Shank 2.5 OAL Tialn Coated 2 Flute
|
|
3/8" CARBIDE BALL END MILL 4 FLUTE
3/8 Dia. Ball 7/8 Flute Length 3/8 Shank 2.5 OAL Uncoated 4 Flute
|
3/8" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
3/8 Dia. Ball 7/8 Flute Length 3/8 Shank 2.5 OAL Tialn coated 4 Flute
|
|
3/8" Drill Mill 4 Flute 60 Deg.
Uncoated Drill Mill
|
Uncoated Spot Drill
|
|
3/8" VARIABLE FLUTE CARBIDE ROUGHING ENDMILL
3/8" Dia. 7/8 Flute Length Fine Pitch 3/8 Shank 2.5 OAL TiaLN Extreme Coated.
|
5/16 Dia. 7/8 Flute Length 5/16 Shank 2.5 OAL
|
|
 |
|
| E-commerce powered by MonsterCommerce shopping cart. |