|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] |
|
3/16" CARBIDE BALL END MILL 4 FLUTE
3/16 Dia. Ball 5/8 Flute Length 3/16 Shank 2.0 OAL Uncoated 4 Flute
|
3/16" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
3/16 Dia. Ball 5/8 Flute Length 3/16 Shank 2.0 OAL Tialn Coated 4 Flute
|
|
3/16 Dia. 5/8 Flute Length 3/16 Shank 2.0 OAL
|
3/16" DIA. 2 FLUTE END MILL TIALN COATED
3/16 Dia. 5/8 Flute Length 3/16 Shank 2.0 OAL TIALN
|
|
3/16 Dia. 5/8 Flute Length 3/16 Shank 2.0 OAL
|
3/16" DIA. 3 FLUTE END MILL TIALN COATED
3/16 Dia. 5/8 Flute Length 3/16 Shank 2.0 OAL TialN Coated
|
|
3/16 Dia. 5/8 Flute Length 3/16 Shank 2.0 OAL
|
3/16" DIA. 4 FLUTE END MILL TIALN COATED
3/16 Dia. 5/8 Flute Length 3/16 Shank 2.0 OAL TialN Coated
|
|
3/8 Variable Flute End Mill for Steel
Our Variable HelixTool Series.TiALN coated.
|
3/8" Variable Flute Ball End Mill for Aluminum ZrN
variable helix multi index 2 flute endmill for maximum material removal in aluminum.
|
|
3/8" Variable Flute End Mill for Aluminum ZrN
variable helix multi index 3 flute endmill for maximum material removal in aluminum.
|
5/16" CARBIDE ROUGHING ENDMILL
5/16" Dia. 7/8 Flute Length Fine Pitch 5/16 Shank 2.5 OAL TiaLN Extreme Coated.
|
|
1/2" 6 Flute End Mill with Weldon Flat
6 flute high performance profiling TiALN extreme coated end mill.
|
1/4" CARBIDE BALL END MILL 2 FLUTE
1/4 Dia. Ball 3/4 Flute Length 1/4 Shank 2.5 OAL Uncoated 2 Flute
|
|
1/4" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
1/4 Dia. Ball 3/4 Flute Length 1/4 Shank 2.5 OAL Tialn Coated 2 Flute
|
1/4" CARBIDE BALL END MILL 4 FLUTE
1/4 Dia. Ball 3/4 Flute Length 1/4 Shank 2.5 OAL Uncoated 4 Flute
|
|
1/4" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
1/4 Dia. Ball 3/4 Flute Length 1/4 Shank 2.5 OAL Tialn coated 4 Flute
|
Uncoated Spot Drill
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
3/16" DOUBLE-END STANDARD END MILL TIALN COATED 2 FLUTE
|
|
3/16" DOUBLE-END STANDARD END MILL TIALN COATED 4 FLUTE
|
3/16" DOUBLE-END STANDARD END MILL UNCOATED 2 FLUTE
|
|
3/16" DOUBLE-END STANDARD END MILL UNCOATED 4 FLUTE
|
3/16" DOUBLE-END STUB END MILL TIALN COATED 2 FLUTE
|
|
3/16" DOUBLE-END STUB END MILL TIALN COATED 4 FLUTE
|
3/16" DOUBLE-END STUB END MILL UNCOATED 2 FLUTE
|
|
3/16" DOUBLE-END STUB END MILL UNCOATED 4 FLUTE
|
3/4-14 Carbide Thread Mill BSPP
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
3/4-14 Carbide Thread Mill BSTP
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
3/4-14 Carbide Thread Mill NPT
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
3/4-14 Carbide Thread Mill NPTF
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
3/8 Stub Variable Flute End Mill for Steel
Our Variable HelixTool Series.TiALN coated.
|
|
3/8" EXTENDED LENGTH Variable Flute End Mill for Aluminum ZrN
variable helix multi index 3 flute endmill for maximum material removal in aluminum.
|
5/16" VARIABLE FLUTE CARBIDE ROUGHING ENDMILL
5/16" Dia. 7/8 Flute Length Fine Pitch 5/16 Shank 2.5 OAL TiaLN Extreme Coated.
|
|
5/32" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
5/32 Dia. 5/16 Flute Length 3/16 Shank 2.0 OAL Tialn coated
|
5/32" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
5/32 Dia. 5/16 Flute Length 3/16 Shank 2.0 OAL Tialn Coated
|
|
5/32" CARBIDE STUB END MILL UNCOATED 2 FLUTE
5/32 Dia. 5/16 Flute Length 3/16 Shank 2.0 OAL Uncoated
|
5/32" CARBIDE STUB END MILL UNCOATED 4 FLUTE
5/32 Dia. 5/16 Flute Length 3/16 Shank 2.0 OAL Uncoated
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1/2" Variable Flute Ball End Mill for Aluminum ZrN
variable helix multi index 2 flute endmill for maximum material removal in aluminum.
|
|
1/2" Variable Flute End Mill for Aluminum ZrN
|
1/2" Variable Flute End Mill for Steel with no flat
Our Variable HelixTool Series.TiALN coated.
|
|
1/2" Variable Flute End Mill for Steel with Weldon Flat
Our Variable HelixTool Series.TiALN coated.
|
1/4" CARBIDE LONG LENGTH END MILL 1.125 FLUTE LENGTH
1/4 Dia. 1.125 Flute Length 1/4 Shank 3.0 OAL Uncoated
|
|
1/4 Dia. 3/4 Flute 1/4 Shank Length 2.5 OAL
|
1/4" DIA. 2 FLUTE END MILL TIALN COATED
1/4 Dia. 3/4 Flute 1/4 Shank Length 2.5 OAL TialN Coated
|
|
1/4 Dia. 3/4 Flute 1/4 Shank Length 2.5 OAL
|
1/4" DIA. 3 FLUTE END MILL TIALN COATED
1/4 Dia. 3/4 Flute 1/4 Shank Length 2.5 OAL TialN Coated
|
|
1/4 Dia. 3/4 Flute 1/4 Shank Length 2.5 OAL
|
1/4" DIA. 4 FLUTE END MILL TIALN COATED
1/4 Dia. 3/4 Flute 1/4 Shank Length 2.5 OAL TialN Coated
|
|
 |
|
| Shopping cart powered by MonsterCommerce ecommerce software. |