|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] |
|
9/16 Dia. 1.250 Flute Length 9/16 Shank 3.50 OAL
|
9/16" DIA. 2 FLUTE END MILL TIALN COATED
9/16 Dia. 1.250 Flute Length 9/16 Shank 3.50 OAL TialN Coated
|
|
9/16 Dia. 1.250 Flute Length 9/16 Shank 3.50 OAL
|
9/16" DIA. 3 FLUTE END MILL TIALN COATED
9/16 Dia. 1.250 Flute Length 9/16 Shank 3.50 OAL TialN Coated
|
|
9/16 Dia. 1.250 Flute Length 9/16 Shank 3.50 OAL
|
9/16" DIA. 4 FLUTE END MILL TIALN COATED
9/16 Dia. 1.250 Flute Length 9/16 Shank 3.50 OAL TialN Coated
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1" Variable Flute End Mill for Aluminum ZrN
variable helix multi index 3 flute endmill for maximum material removal in aluminum.
|
|
1.0 Variable Flute End Mill for Steel with Weldon Flat
Variable HelixTool Series.TiALN coated.
|
1.0" Variable Flute Ball End Mill for Aluminum ZrN
variable helix multi index 2 flute endmill for maximum material removal in aluminum.
|
|
3/4" CARBIDE BALL END MILL 2 FLUTE
3/4 Dia. Ball 1.5 Flute Length 3/4 Shank 4.0 OAL Uncoated 2 Flute
|
3/4" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
3/4 Dia. Ball 1.5 Flute Length 3/4 Shank 4.0 OAL Tialn Coated 2 Flute
|
|
3/4" CARBIDE BALL END MILL 4 FLUTE
3/4 Dia. Ball 1.5 Flute Length 3/4 Shank 4.0 OAL Uncoated 4 Flute
|
3/4" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
3/4 Dia. Ball 1.5 Flute Length 3/4 Shank 4.0 OAL Tialn Coated 4 Flute
|
|
3/4 Dia. 1.50 Flute Length Fine Pitch 3/4 Shank 4.0 OAL TiaLN Extreme Coated.
|
Uncoated Spot Drill
|
|
3/8" CARBIDE LONG LENGTH END MILL 1.125 FLUTE LENGTH
3/8 Dia. 1.125 Flute Length 3/8 Shank 3.0 OAL Uncoated
|
5/8 Dia. 1.250 Flute Length 5/8 Shank 3.5 OAL
|
|
5/8" DIA. 2 FLUTE END MILL TIALN COATED
5/8 Dia. 1.250 Flute Length 5/8 Shank 3.5 OAL TialN Coated
|
5/8 Dia. 1.250 Flute Length 5/8 Shank 3.5 OAL
|
|
5/8" DIA. 3 FLUTE END MILL TIALN COATED
5/8 Dia. 1.250 Flute Length 5/8 Shank 3.5 OAL TialN Coated
|
5/8 Dia. 1.250 Flute Length 5/8 Shank 3.5 OAL
|
|
5/8" DIA. 4 FLUTE END MILL TIALN COATED
5/8 Dia. 1.250 Flute Length 5/8 Shank 3.5 OAL TialN Coated
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1" EXTENDED LENGTH Variable Flute End Mill for Aluminum ZrN
variable helix multi index 3 flute endmill for maximum material removal in aluminum.
|
|
1.0 Stub Variable Flute End Mill for Steel with Weldon Flat
Our Variable HelixTool Series.TiALN coated.
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
3/4 Dia. 1.5 Flute Length 3/4 Shank 4.0 OAL
|
3/4" DIA. 2 FLUTE END MILL TIALN COATED
3/4 Dia. 1.5 Flute Length 3/4 Shank 4.0 OAL TialN Coated
|
|
3/4 Dia. 1.5 Flute Length 3/4 Shank 4.0 OAL
|
3/4" DIA. 3 FLUTE END MILL TIALN COATED
3/4 Dia. 1.5 Flute Length 3/4 Shank 4.0 OAL TialN Coated
|
|
3/4 Dia. 1.5 Flute Length 3/4 Shank 4.0 OAL
|
3/4" DIA. 4 FLUTE END MILL TIALN COATED
3/4 Dia. 1.5 Flute Length 3/4 Shank 4.0 OAL TialN Coated
|
|
Uncoated Spot Drill
|
3/4" VARIABLE FLUTE CARBIDE ROUGHING ENDMILL
3/4 Dia. 1.50 Flute Length Fine Pitch 3/4 Shank 4.0 OAL TiaLN Extreme Coated.
|
|
3/8" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
3/8 Dia. 5/8 Flute Length 3/8 Shank 2.0 OAL Tialn Coated
|
3/8" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
3/8 Dia. 5/8 Flute Length 3/8 Shank 2.0 OALTialn Coated
|
|
3/8" CARBIDE STUB END MILL UNCOATED 2 FLUTE
3/8 Dia. 5/8 Flute Length 3/8 Shank 2.0 OAL Uncoated
|
3/8" CARBIDE STUB END MILL UNCOATED 4 FLUTE
3/8 Dia. 5/8 Flute Length 3/8 Shank 2.0 OAL Uncoated
|
|
7/16" DOUBLE-END STANDARD END MILL TIALN COATED 2 FLUTE
|
7/16" DOUBLE-END STANDARD END MILL TIALN COATED 4 FLUTE
|
|
7/16" DOUBLE-END STANDARD END MILL UNCOATED 2 FLUTE
|
7/16" DOUBLE-END STANDARD END MILL UNCOATED 4 FLUTE
|
|
7/16" DOUBLE-END STUB END MILL TIALN COATED 2 FLUTE
|
7/16" DOUBLE-END STUB END MILL TIALN COATED 4 FLUTE
|
|
7/16" DOUBLE-END STUB END MILL UNCOATED 2 FLUTE
|
7/16" DOUBLE-END STUB END MILL UNCOATED 4 FLUTE
|
|
7/8" CARBIDE BALL END MILL 2 FLUTE
7/8 Dia. Ball 1.5 Flute Length 7/8 Shank 4.0 OAL Uncoated 2 Flute
|
7/8" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
7/8 Dia. Ball 1.5 Flute Length 7/8 Shank 4.0 OAL Tialn Coated 2 Flute
|
|
 |
|
| E-commerce powered by MonsterCommerce shopping carts. |