|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] |
|
5/16" DIA. 2 FLUTE END MILL TIALN COATED
5/16 Dia. 7/8 Flute Length 5/16 Shank 2.5 OAL TialN Coated
|
5/16 Dia. 7/8 Flute Length 5/16 Shank 2.5 OAL
|
|
5/16" DIA. 3 FLUTE END MILL TIALN COATED
5/16 Dia. 7/8 Flute Length 5/16 Shank 2.5 OAL TialN Coated
|
5/16 Dia. 7/8 Flute Length 5/16 Shank 2.5 OAL
|
|
5/16" DIA. 4 FLUTE END MILL TIALN COATED
5/16 Dia. 7/8 Flute Length 5/16 Shank 2.5 OAL TialN Coated
|
5/16" Drill Mill 4 Flute 60 Deg.
Uncoated Drill Mill
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
5/8" 6 Flute End Mill with Weldon Flat
6 flute high performance profiling TiALN extreme coated end mill.
|
|
5/8" Drill Mill 4 Flute 60 Deg.
Uncoated Drill Mill
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1/2 Dia. 1.0 Flute Length Fine Pitch 1/2 Shank 3.0 OAL TiaLN Extreme Coated.
|
|
Uncoated Spot Drill
|
6 flute high performance profiling TiALN extreme coated end mill.
|
|
3/8 Dia. 7/8 Flute Length 3/8 Shank 2.5 OAL
|
3/8" DIA. 2 FLUTE END MILL TIALN COATED
3/8 Dia. 7/8 Flute Length 3/8 Shank 2.5 OAL TialN Coated
|
|
3/8 Dia. 7/8 Flute Length 3/8 Shank 2.5 OAL
|
3/8" DIA. 3 FLUTE END MILL TIALN COATED
3/8 Dia. 7/8 Flute Length 3/8 Shank 2.5 OAL TialN Coated
|
|
3/8 Dia. 7/8 Flute Length 3/8 Shank 2.5 OAL
|
3/8" DIA. 4 FLUTE END MILL TIALN COATED
3/8 Dia. 7/8 Flute Length 3/8 Shank 2.5 OAL TialN Coated
|
|
5/16" CARBIDE LONG LENGTH END MILL 1.125 FLUTE LENGTH
5/16 Dia. 1.125 Flute Length 5/16 Shank 3.0 OAL Uncoated
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
5/8 Variable Flute End Mill for Steel with Weldon Flat
Our Variable HelixTool Series.TiALN coated.
|
5/8" Variable Flute Ball End Mill for Aluminum ZrN
variable helix multi index 2 flute endmill for maximum material removal in aluminum.
|
|
5/8" Variable Flute End Mill for Aluminum ZrN
variable helix multi index 3 flute endmill for maximum material removal in aluminum.
|
7/16" CARBIDE BALL END MILL 2 FLUTE
7/16 Dia. Ball 1.0 Flute Length 7/16 Shank 2.5 OAL Uncoated 2 Flute
|
|
7/16" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
7/16 Dia. Ball 1.0 Flute Length 7/16 Shank 2.5 OAL Tialn Coated 2 Flute
|
7/16" CARBIDE BALL END MILL 4 FLUTE
7/16 Dia. Ball 1.0 Flute Length 7/16 Shank 2.5 OAL Uncoated 4 Flute
|
|
7/16" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
7/16 Dia. Ball 1.0 Flute Length 7/16 Shank 2.5 OAL Tialn Coated 4 Flute
|
1/2" CARBIDE BALL END MILL 2 FLUTE
1/2 Dia. Ball 1.0 Flute Length 1/2 Shank 3.0 OAL Uncoated 2 Flute
|
|
1/2" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
1/2 Dia. Ball 1.0 Flute Length 1/2 Shank 3.0 OAL Tialn Coated 2 Flute
|
1/2" CARBIDE BALL END MILL 4 FLUTE
1/2 Dia. Ball 1.0 Flute Length 1/2 Shank 3.0 OAL Uncoated 4 Flute
|
|
1/2" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
1/2 Dia. Ball 1.0 Flute Length 1/2 Shank 3.0 OAL Tialn coated 4 Flute
|
Uncoated Spot Drill
|
|
1/2" VARIABLE FLUTE CARBIDE ROUGHING ENDMILL
1/2 Dia. 1.0 Flute Length Fine Pitch 1/2 Shank 3.0 OAL TiaLN Extreme Coated.
|
1/4" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
1/4 Dia. 1/2 Flute Length 1/4 Shank 2.0 OAL Tialn Coated
|
|
1/4" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
1/4 Dia. 1/2 Flute Length 1/4 Shank 2.0 OAL Tialn Coated
|
1/4" CARBIDE STUB END MILL UNCOATED 2 FLUTE
1/4 Dia. 1/2 Flute Length 1/4 Shank 2.0 OAL Uncoated
|
|
1/4" CARBIDE STUB END MILL UNCOATED 4 FLUTE
1/4 Dia. 1/2 Flute Length 1/4 Shank 2.0 OAL Uncoated
|
3/4" 6 Flute End Mill with Weldon Flat
6 flute high performance profiling TiALN extreme coated end mill.
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
5/16" DOUBLE-END STANDARD END MILL TIALN COATED 2 FLUTE
|
|
5/16" DOUBLE-END STANDARD END MILL TIALN COATED 4 FLUTE
|
5/16" DOUBLE-END STANDARD END MILL UNCOATED 2 FLUTE
|
|
5/16" DOUBLE-END STANDARD END MILL UNCOATED 4 FLUTE
|
5/16" DOUBLE-END STUB END MILL TIALN COATED 2 FLUTE
|
|
5/16" DOUBLE-END STUB END MILL TIALN COATED 4 FLUTE
|
5/16" DOUBLE-END STUB END MILL UNCOATED 2 FLUTE
|
|
5/16" DOUBLE-END STUB END MILL UNCOATED 4 FLUTE
|
5/8 Stub Variable Flute End Mill for Steel with Weldon Flat
Our Variable HelixTool Series.TiALN coated.
|
|
 |
|
| Shopping cart powered by MonsterCommerce e-commerce solutions. |