|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] |
|
7/8" CARBIDE BALL END MILL 4 FLUTE
7/8 Dia. Ball 1.5 Flute Length 7/8 Shank 4.0 OAL Uncoated 4 Flute
|
7/8" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
7/8 Dia. Ball 1.5 Flute Length 7/8 Shank 4.0 OAL Tialn Coated 4 Flute
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1.0 Dia. 1.50 Flute Length Fine Pitch 1.0 Shank 4.0 OAL TiaLN Extreme Coated.
|
|
1.0" CARBIDE BALL END MILL 2 FLUTE
1.0 Dia. Ball 1.5 Flute Length 1.0 Shank 4.0 OAL Uncoated 2 Flute
|
1.0" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
1.0 Dia. Ball 1.5 Flute Length 1.0 Shank 4.0 OAL Tialn Coated 2 Flute
|
|
1.0" CARBIDE BALL END MILL 4 FLUTE
1.0 Dia. Ball 1.5 Flute Length 1.0 Shank 4.0 OAL Uncoated 4 Flute
|
1.0" CARBIDE BALL END MILL 4 FLUTE TIALN COATED
1.0 Dia. Ball 1.5 Flute Length 1.0 Shank 4.0 OAL Tialn Coated 4 Flute
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
7/16" CARBIDE LONG LENGTH END MILL 2.0 FLUTE LENGTH
7/16 Dia. 2.0 Flute Length 7/16 Shank 4.0 OAL Uncoated
|
|
7/8" DIA. 4 FLUTE END MILL TIALN COATED
7/8 Dia. 1.5 Flute Length 7/8 Shank 4.0 OAL TialN Coated
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1.0 Dia. 1.5 Flute Length 1.0 Shank 4.0 OAL
|
|
1" DIA. 2 FLUTE END MILL TIALN COATED
1.0 Dia. 1.5 Flute Length 1.0 Shank 4.0 OAL TialN Coated
|
1.0 Dia. 1.5 Flute Length 1.0 Shank 4.0 OAL
|
|
1" DIA. 3 FLUTE END MILL TIALN COATED
1.0 Dia. 1.5 Flute Length 1.0 Shank 4.0 OAL TialN Coated
|
1.0 Dia. 1.5 Flute Length 1.0 Shank 4.0 OAL
|
|
1" DIA. 4 FLUTE END MILL TIALN COATED
1.0 Dia. 1.5 Flute Length 1.0 Shank 4.0 OAL TialN Coated
|
1" VARIABLE FLUTE CARBIDE ROUGHING ENDMILL
1.0 Dia. 1.50 Flute Length Fine Pitch 1.0 Shank 4.0 OAL TiaLN Extreme Coated.
|
|
1/2" DOUBLE-END STANDARD END MILL TIALN COATED 2 FLUTE
|
1/2" DOUBLE-END STANDARD END MILL TIALN COATED 4 FLUTE
|
|
1/2" DOUBLE-END STANDARD END MILL UNCOATED 2 FLUTE
|
1/2" DOUBLE-END STANDARD END MILL UNCOATED 4 FLUTE
|
|
1/2" DOUBLE-END STUB END MILL TIALN COATED 2 FLUTE
|
1/2" DOUBLE-END STUB END MILL TIALN COATED 4 FLUTE
|
|
1/2" DOUBLE-END STUB END MILL UNCOATED 2 FLUTE
|
1/2" DOUBLE-END STUB END MILL UNCOATED 4 FLUTE
|
|
7/16" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
7/16 Dia. 5/8 Flute Length 7/16 Shank 2.5 OAL Tialn Coated
|
7/16" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
7/16 Dia. 5/8 Flute Length 7/16 Shank 2.5 OAL Tialn Coated
|
|
7/16" CARBIDE STUB END MILL UNCOATED 2 FLUTE
7/16 Dia. 5/8 Flute Length 7/16 Shank 2.5 OAL Uncoated
|
7/16" CARBIDE STUB END MILL UNCOATED 4 FLUTE
7/16 Dia. 5/8 Flute Length 7/16 Shank 2.5 OAL Uncoated
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1/2" CARBIDE LONG LENGTH END MILL 1.50 FLUTE LENGTH
1/2 Dia. 1.50 Flute Length 1/2 Shank 4.0 OAL Uncoated
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1/2" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
1/2 Dia. 5/8 Flute Length 1/2 Shank 2.5 OAL Tialn Coated
|
|
1/2" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
1/2 Dia. 5/8 Flute Length 1/2 Shank 2.5 OAL Tialn Coated
|
1/2" CARBIDE STUB END MILL UNCOATED 2 FLUTE
1/2 Dia. 5/8 Flute Length 1/2 Shank 2.5 OAL Uncoated
|
|
1/2" CARBIDE STUB END MILL UNCOATED 4 FLUTE
1/2 Dia. 5/8 Flute Length 1/2 Shank 2.5 OAL Uncoated
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
1/2" CARBIDE LONG LENGTH END MILL 2.0 FLUTE LENGTH
1/2 Dia. 2.0 Flute Length 1/2 Shank 4.0 OAL Uncoated
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
1/2" Drill Mill 2 Flute 90 Deg.
Uncoated Drill Mill
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
5/8" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
5/8 Dia. 3/4 Flute Length 5/8 Shank 3.0 OAL Tialn Coated
|
5/8" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
5/8 Dia. 3/4 Flute Length 5/8 Shank 3.0 OAL Tialn Coated
|
|
5/8" CARBIDE STUB END MILL UNCOATED 2 FLUTE
5/8 Dia. 3/4 Flute Length 5/8 Shank 3.0 OAL Uncoated
|
5/8" CARBIDE STUB END MILL UNCOATED 4 FLUTE
5/8 Dia. 3/4 Flute Length 5/8 Shank 3.0 OAL Uncoated
|
|
Size #0 x .0312 point dia. x 1/8 body x .0312 point length
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
 |
|
| Shopping cart powered by MonsterCommerce ecommerce software. |