|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] |
|
3/32" CARBIDE BALL END MILL 4 FLUTE
3/32 Dia. Ball 3/8 Flute Length 1/8 Shank 1.5 OAL Uncoated 4 Flute
|
3/32" CARBIDE STUB END MILL TIALN COATED 2 FLUTE
3/32 Dia. 3/16 Flute Length 1/8 Shank 1.5 OAL Tialn coated
|
|
3/32" CARBIDE STUB END MILL TIALN COATED 4 FLUTE
3/32 Dia. 3/16 Flute Length 1/8 Shank 1.5 OAL Tialn coated
|
3/32" CARBIDE STUB END MILL UNCOATED 2 FLUTE
3/32 Dia. 3/16 Flute Length 1/8 Shank 1.5 OAL Uncoated
|
|
3/32" CARBIDE STUB END MILL UNCOATED 4 FLUTE
3/32 Dia. 3/16 Flute Length 1/8 Shank 1.5 OAL Uncoated
|
3/32 Dia. 3/8 Flute Length 1/8 Shank 1.5 OAL
|
|
3/32" DIA. 2 FLUTE END MILL TIALN COATED
3/32 Dia. 3/8 Flute Length 1/8 Shank 1.5 OAL TialN Coated
|
3/32 Dia. 3/8 Flute Length 1/8 Shank 1.5 OAL
|
|
3/32" DIA. 3 FLUTE END MILL TIALN COATED
3/32 Dia. 3/8 Flute Length 1/8 Shank 1.5 OAL TialN Coated
|
3/32 Dia. 3/8 Flute Length 1/8 Shank 1.5 OAL
|
|
3/32" DIA. 4 FLUTE END MILL TIALN COATED
3/32 Dia. 3/8 Flute Length 1/8 Shank 1.5 OAL TialN Coated
|
3/4" Drill Mill 4 Flute 90 Deg.
Uncoated Drill Mill
|
|
3/8" Drill Mill 4 Flute 90 Deg.
Uncoated Drill Mill
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
6 flute high performance profiling TiALN extreme coated end mill.
|
5/16" Drill Mill 4 Flute 90 Deg.
Uncoated Drill Mill
|
|
5/16" Variable Flute Ball End Mill for Aluminum ZrN
variable helix multi index 2 flute endmill for maximum material removal in aluminum.
|
5/8" Drill Mill 4 Flute 90 Deg.
Uncoated Drill Mill
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1/4 Dia. 3/4 Flute Length Fine Pitch 1/4 Shank 2.5 OAL TialN Extreme Coated.
|
|
1/4" VARIABLE FLUTE CARBIDE ROUGHING ENDMILL
1/4 Dia. 3/4 Flute Length Fine Pitch 1/4 Shank 2.5 OAL TialN Extreme Coated.
|
1/4" Drill Mill 2 Flute 120 Deg.
Uncoated Drill Mill
|
|
1/4-18 Carbide Thread Mill NPT
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1/4-18 Carbide Thread Mill NPTF
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
1/4-19 Carbide Thread Mill BSPP
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
1/4-19 Carbide Thread Mill BSTP
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
1/8" CARBIDE BALL END MILL 2 FLUTE
1/8 Dia. Ball 1/2 Flute Length 1/8 Shank 1.5 OAL Uncoated 2 Flute
|
1/8" CARBIDE BALL END MILL 2 FLUTE TIALN COATED
1/8 Dia. Ball 1/2 Flute Length 1/8 Shank 1.5 OAL Tialn Coated 2 Flute
|
|
1/8" CARBIDE BALL END MILL 4 FLUTE
1/8 Dia. Ball 1/2 Flute Length 1/8 Shank 1.5 OAL Uncoated 4 Flute
|
1/8 Dia. 1/2 Flute Length 1/8 Shank 1.5 OAL
|
|
1/8" DIA. 2 FLUTE END MILL TIALN COATED
1/8 Dia. 1/2 Flute Length 1/8 Shank 1.5 OAL TialN Coated
|
1/8 Dia. 1/2 Flute Length 1/8 Shank 1.5 OAL
|
|
1/8" DIA. 3 FLUTE END MILL TIALN COATED
1/8 Dia. 1/2 Flute Length 1/8 Shank 1.5 OAL TialN Coated
|
1/8 Dia. 1/2 Flute Length 1/8 Shank 1.5 OAL
|
|
1/8" DIA. 4 FLUTE END MILL TIALN COATED
1/8 Dia. 1/2 Flute Length 1/8 Shank 1.5 OAL TialN Coated
|
1/8" Drill Mill 2 Flute 120 Deg.
Uncoated Drill Mill
|
|
3/16" CARBIDE LONG LENGTH END MILL .750 FLUTE LENGTH
3/16 Dia. 3/4 Flute Length 3/16 Shank 2.5 OAL Uncoated
|
3/16" Drill Mill 2 Flute 120 Deg.
Uncoated Drill Mill
|
|
Uncoated Spot Drill
|
3/4" Drill Mill 2 Flute 120 Deg.
Uncoated Drill Mill
|
|
6 flute high performance profiling TiALN extreme coated end mill.
|
3/8" Drill Mill 2 Flute 120 Deg.
Uncoated Drill Mill
|
|
5/16 Variable Flute End Mill for Steel
Our Variable HelixTool Series.TiALN coated.
|
5/16" Drill Mill 2 Flute 120 Deg.
Uncoated Drill Mill
|
|
5/16" Variable Flute End Mill for Aluminum ZrN
variable helix multi index 3 flute endmill for maximum material removal in aluminum.
|
5/8" Drill Mill 2 Flute 120 Deg.
Uncoated Drill Mill
|
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
Our premium carbide Tialn coated thread mills have helical flute geometry. This dramatically reduces cutting pressure, which results in higher feed rates, faster cycle times, better surface finish and accuracy, and lower cost per hole.
|
|
 |
|
| E-commerce powered by MonsterCommerce shopping cart. |