CALL US AT (716) 462-4349
View Cart
|
Checkout
Items:
(0)
Home
About Us
Select Tool by Material
FEEDS & SPEEDS
Special Endmill Quotes
Login
Order Status
Contact Us
Blog
Email Address:
Password:
Remember Me
Create an account
Forgot Password?
45/60 DEG HELIX MILLS
ALUMINUM SOFT JAWS
BACK CHAMFER TOOLS
BALLNOSE END MILLS
CENTER DRILLS (COMB)
CHAMFER MILLS
CORNER RADIUS MILLS
CORNER ROUNDING
COUNTERSINKS
DOUBLE-END END MILLS
DRILL BITS - CARBIDE
DRILLMILLS/CHAMFER
ENGRAVING
GUNSMITHING TOOLS
HARD MILLING END MILLS
HEX BROACHES
HIGH FEED MILLS
KNIFE MAKING
LONG LENGTH MILLS
METRIC END MILLS
PRE-REAM END MILLS
REAMERS
REG. LENGTH END MILLS
ROSE-INDEX
ROUGHING END MILLS
SIX FLUTE END MILLS
SPECIALS
SPOT DRILLS
STUB END MILLS
SURPLUS TOOLING
TAPER END MILLS
TAS ROUGHERS
THREAD MILLS
TOOLING PACKAGES
TORMACH COOLANT RING
VARIABLE FLUTE
ZEBRA SKIMMERS
Testimonials
Screen Share
Home
>
VARIABLE FLUTE
>
VARIABLE FLUTE END MILLS FOR ALUMINUM (VFA)
>
3 FLUTE
3 FLUTE
STANDARD FLUTE LENGTH, CORNER RADIUS
OUR ORIGINAL 3 FLUTE STANDARD LENGTH CUTTER WITH CORNER RADIUS
STUB FLUTE LENGTH, CORNER RADIUS
STANDARD FLUTE LENGTH, CORNER RADIUS, ROUGH/FINISH GEOMETRY
A STANDARD LENGTH 3 FLUTE CUTTER WITH CORNER RADS AND ALTERNATING GASHES GROUND ON THE FLUTES TO PRODUCE A CHIP BREAKER EFFECT WHILE STILL LEAVING A FINISHED SURFACE
STANDARD FLUTE LENGTH, SQUARE CORNER
A STANDARD LENGTH 3 FLUTE CUTTER WITH SHARP CORNERS
STANDARD FLUTE LENGTH, SQUARE CORNER, ROUGH/FINISH GEOMETRY
A STANDARD LENGTH 3 FLUTE CUTTER WITH SHARP CORNERS AND ALTERNATING GASHES GROUND ON THE FLUTES TO PRODUCE A CHIP BREAKER EFFECT WHILE STILL LEAVING A FINISHED SURFACE
LONG FLUTE LENGTH, CORNER RADIUS
OUR ORIGINAL LONG LENGTH 3 FLUTE CUTTER WITH CORNER RADIUS
LONG FLUTE LENGTH, CORNER RADIUS, ROUGH/FINISH GEOMETRY
A LONG LENGTH 3 FLUTE CUTTER WITH CORNER RADIUS AND ALTERNATING GASHES GROUND ON THE FLUTES TO PRODUCE A CHIP BREAKER EFFECT WHILE STILL LEAVING A FINISHED SURFACE
LONG REACH, SHORT LOC, NECKED RELIEF
