Testimonials
Screen Share
|
Home > ROSE-INDEX > 1" - 2" RANGE ROSE-INDEX, 45-60-90 DEGREE INDEXING BLOCK W/ DEGREE WHEEL
1" - 2" RANGE ROSE-INDEX, 45-60-90 DEGREE INDEXING BLOCK W/ DEGREE WHEEL
|
|
Part Number: ROSE-INDEX-1-2 W/ DEGREES
|
This is the same Rose-Index everyone knows and loves, but with an add-on called the Degree Wheel. The degree wheel is an add on of laser markings showing 360 degrees. Lining up is as simple as pushing a machinist square into the vee grooved side of the Rose-Index. As you push the Rose-Index into the part it will become aligned with the 0 degrees up and 180 down. We recommend that you only leave a few thou of stock protruding from the Rose-Index. This will protect you from scratching the face of the Degree Wheel because the machinist square will be in contact with the stock. Choose the degree of rotation you want. If you want a 10 degree rotation simply line up the 10 degree marks on the top and the 190 degree on the bottom. Simply add 180 degrees to your desired angle, and line up the desired marks on the square
Solid steel work piece indexer. Easily re-position your work piece, rotating at 45, 60 or 90 degree increments, or use angled parallels for one degree increments. Removable during machining made in the USA.
Re-positioning of work: When your machine does not have enough travel for your work piece, simply slide over, or flip stock end for end. You will be able to remove your project and put it into another machine,
or back into the same machine at a later time without losing it’s orientation.
Easily mill flats, hexes for sockets or key slots. It’s compact size and convenient design allows for easy removal during machining.
• Easily mill wrench flats
• Works with 1” to 2” round stock
• Transfers from machine to machine
• Extends work envelope of long parts
• Removable for inspection
Simply slide the ROSE-INDEX over round stock, align with a machinist square perpendicular to the table and snug the brass tipped set screw.
Fits stock from 1 inch through 2 inches. There are no collets or any other items required.
|
Rose-Index
Makes Indexing at 45, 60 or 90 Degrees Easy
From common drill press to machining centers the Rose-Index simplifies repositioning. Easily rotate your work at multiples of 45, 60 or 90 degrees for milling flats, hexes for sockets or key slots. One degree increments can be obtained by adding angled parallels. It’s compact size and convenient design allows for easy removal during machining.
|
|
Product Reviews
|
|